/Support Center

CuePath Logo

You are not required to assemble the CuePath Smart Blister™.

 

Your local pharmacy will attach our CuePath™ Smart Sticker and CuePath™ Clip on to your blister package.

You will need to reset the CuePath Hub by unplugging it from the outlet. Wait 10 seconds, and plug the hub back in. After a few minutes, there should be three solid green lights.

 

Did this help? If not, feel free to call 1-888-877-2848 or email support@cuepath.io and one of our local technical support specialists will be happy to assist.

If you do not hear audio reminders from your CuePath Clip, there may have been an issue during the initial set up. To troubleshoot this issue, please follow these steps:

  1. Check your CuePath Clip LED light for a blinking green light. If there are no lights, then you may need to change the battery.
  2. If you have replaced the battery and the issue still persists, the alarm reminders have been disabled. Please visit the article: “Can I enable or disable the medication reminders?” for a step-by-step guide to enable medication reminders.
  3. If there is a blinking green light and medication reminders are enabled, then your CuePath Smart Blister might not have been connected properly. Simply remove the clip and plug it back in.

Did this help? If not, feel free to call 1-888-877-2848 or email support@cuepath.io and one of our local technical support specialists will be happy to assist.

When you see a blinking yellow light, your CuePath Clip is out of range from the CuePathHub. To troubleshoot this issue, please follow these steps:

  1. Keep the CuePath Smart Blisterin the same room.
  2. Place your CuePath Hub away from other electrical devices.
  3. Remove any obstruction that may affect the connection between your CuePath Hub and CuePath Clip.

Did this help? If not, feel free to call 1-888-877-2848 or email support@cuepath.io and one of our local technical support specialists will be happy to assist.

When you see a blinking red  light, your CuePath Smart Blister might not have been connected properly. Simply remove the clip and plug it back in.

 

Did this help? If not, feel free to call 1-888-877-2848 or email support@cuepath.io and one of our local technical support specialists will be happy to assist.

Your CuePath Clip™ may be out of battery. Simply replace the battery to continue the services.

 

Did this help? If not, feel free to call 1-888-877-2848 or email support@cuepath.io and one of our local technical support specialists will be happy to assist.

When you see the “Clip is out of range” status on the CuePath Caregiver App, your CuePathClip is out of range from the CuePath Hub. To troubleshoot this issue, please follow these steps:

  1. Keep the CuePath Smart Blister in the same room.
  2. Place your CuePath Hub away from other electrical devices.
  3. Remove any obstruction that may affect the connection between your CuePath Hub and CuePath Clip.

Did this help? If not, feel free to call 1-888-877-2848 or email support@cuepath.io and one of our local technical support specialists will be happy to assist.

When you see the “Clip Detached” status on the CuePath Caregiver App, there may be an issue with your CuePath™ Clip. To troubleshoot this issue, please follow these steps:

 

  1. Check your CuePath Clip LED light for a blinking green light. If there are no lights, then you may need to change the battery. 
  2. If there is a blinking green light, then your CuePath Smart Blister might not have been connected properly. Simply remove the clip and plug it back in. 

 

Did this help? If not, feel free to call 1-888-877-2848 or email support@cuepath.io and one of our local technical support specialists will be happy to assist.

Simply plug your CuePath Hub™ to any electrical outlet. Once all three lights are on, we are able to monitor your patients Smart Blister Pack.

You can call the patient by using the CuePath™ Caregiver App.

  1. Log on to the CuePath Caregiver App.
  2. Click on the patient’s profile
  3. Click on the phone icon to make the call.

 

To update the patient’s phone number, please visit the article “How do I update patient information?”

You can update patient information by accessing the CuePath™ Caregiver App.

  1. Log on to the CuePath Caregiver App.
  2. Click on the patient’s profile
  3. Click on the three dots on the left side of the app.
  4. Click “Edit Patient Profile.”
  5. After making changes to the patient profile, click “Save.”

You can change the medication schedule by accessing the CuePath™ Caregiver App.

  1. Log on to the CuePath Caregiver App
  2. Click on the patient’s profile
  3. Click on the three dots on the left side of the app.
  4. Click “edit medication timeframe.”
  5. Apply changes as necessary.

NOTE: Please consult your doctor or pharmacy before making changes to your patient or client’s medication schedule.

Your CuePath™ Clip may be out of battery. Simply replace the battery to continue the services.

 

If you have changed the battery and still do not see the blinking green lights, please contact support@cuepath.io

You can view your client’s previous packs through the CuePath™ Caregiver App.

  • In the CuePath Caregiver App, click on your client’s profile.
  • Once you’re in your client’s profile, click on “View All Packs”.
  • By default, you will be redirected to that client’s most recent blister pack.
  • Scroll through your client’s previous packs.

You can view your client’s most recent pack through the CuePath™ Caregiver App.

  • In the CuePath Caregiver App, click on your client’s profile.
  • Once you’re in your client’s profile, click on “View All Packs”.
  • By default, you will be redirected to that client’s most recent blister pack.

You do not need to set up any devices with the internet or WiFi connection.

 

Simply plug your CuePath™ Hub to the nearest outlet and you are ready to use the CuePath medication monitoring and reminder features.

If you do not want the reminder feature for the patient you’re caring for, you can turn off the clip alarms through the CuePath™ Caregiver App.

  • Click on the patient name
  • Click on the three dots on the left side of the app
  • Click on “Edit Patient Profile”
  • Click on “Send Clip notifications (beeping)”

You can program the alarm through the CuePath™ Caregiver App.

  • Click on the patient name that requires a customized medication time frame.
  • Click on the three dots on the left side of the app.
  • Click on “Edit Meds Timeframes.”

 

Please note that, by default, the medication timeframes are as followed:

  • Breakfast from 7:00AM – 9:00AM
  • Lunch from: 11:00AM- 1:00PM
  • Supper: 4:00PM – 6:00PM
  • Bedtime: 8:00PM – 10:00PM

Simply align the CuePath™ Clip with the CuePath Smart Blister™. When you’ve heard five consecutive beeps, the clip has been connected successfully.

The clip will produce an audio reminder during the patient’s medication time frame. The default times are as followed:

 

  • Breakfast from 7:00AM – 9:00AM
  • Lunch from: 11:00AM- 1:00PM
  • Supper: 4:00PM – 6:00PM
  • Bedtime: 8:00PM – 10:00PM

 

There will be four alarm reminders during each medication time frame. If medication is not taken after the fourth alarm, an SMS notification will be sent to the caregivers registered under that patient.

Please visit: https://app.cuepath.io/pharmacy/

 

You can change your SMS notifications by accessing the CuePath™ Caregiver App. To update your SMS notifications:

  1. Click on the three lines on the top right of your screen.
  2. Click on My Profile.
  3. Under your phone number, select how you would like to receive notifications.

 

Please contact your local pharmacy.

Your CuePath partnered pharmacy will ask for your email address to add you as a caregiver. Once you’ve received the email, please follow the instructions to complete registration.

 

 

For your first delivery, you will receive the following:

  1. CuePath Smart Blister™
  2. CuePath Hub™

After the first delivery, your local pharmacy will provide your weekly CuePath Smart Blister.

A single CuePath client can be monitored by any number of caregivers through the CuePath™ Caregiver App.  These can be family members, paid caregivers, physicians or anyone who would like to help support medication adherence.